Vollers manufactured T shaped stand off brackets, made from 2mm Stainless Steel folded into shape, spot welded together, 10mm holes punched through the material, radius cut corners and finally cleaned, thus giving it a professional finish.
Other products are available for manufacture in Stainless Steel or Aluminium.

Vollers manufactured Louvred Ventilators for an electrical substation building. Notice in this frontal view, the clean lines and lack of any visible fasteners.

Vollers can cut and fold perforated steel into the required shape.

Vollers can now manufacture Half Round Gutter Brackets to your specs. These examples are made from 2mm Stainless Steel.

Vollers manufacture drains for your veranda or driveways with a quality finish.

A close-up of a drain example.

Vollers can produce various shapes and profiles in different types of materials and gauges.

An example of a Vollers manufactured rainwater head.

Another example of a Vollers manufactured rainwater head.

An example of a Vollers manufactured boxed air vent.

Vollers manufactured Stainless Steel plates for a particular requirement. These were produced from 1.5mm stainless with varied size holes punched through the material.

Vollers can produce some extraordinary shapes and profiles in different types of materials and gauges.

Vollers manufactured these angle brackets from 6mm Stainless Steel. We punched and chamfered the holes, then bent the brackets into shape.

Vollers manufactured this designer water feature from 3mm Stainless Steel for the tube and 6mm for the base. The tube was made in two parts then welded together and cleaned so as not to see any joints. A chain was then welded inside one end so that water could trickle down, giving the desired effect.

Vollers manufactured this gutter profile & nozzle from 1.5mm Gal, it was bent into shape and welded together.

An inside view of the of the gutter.

Vollers manufacture trims and brackets in aluminium.

Vollers manufacture metal flashings to a length of 8.0 metres in all BlueScope standard colours, plus a variety of other materials.

Vollers manufacture rainwater heads of every design, this particular type was made to be installed below an existing eaves gutter.

It has a perforated lid which is removable for easy cleaning when required.

Vollers manufacture all types of curved flashings, this barge capping has a rib machined into it which follows the curved lines 100%, this prevents oil canning.

Vollers manufacture any kind of brackets, door plates etc, with varying size holes, slots, folds, from all types of materials.

Vollers manufacture these post feet from 5mm hot roll steel. We first cut to size, then punch the holes, radius the corners, fold the channel then weld together giving the finished product.

Vollers manufacture a large array of products, here are some hot roll steel sections that we regularly produce.